MEMO TO USERS - ServicePak WR05200 U.S. Version
 
Subject:  ServicePak for OS/2 Extended Edition 1.30, 1.30.1, and
1.30.2.
 
Memorandum to:  Licensees of OS/2 Extended Edition
 
Enclosed is the IBM OS/2 ServicePak you requested
 
This ServicePak is for all OS/2 Extended Edition 1.30 users. WR05200
is accumulative and includes all fixes from WR05000, through WR05200
including the Base, Database Manager, Communication Manager, and LAN
Server / Requester components.
 
CAUTION: READ BEFORE APPLYING WR05200
 
Please read this entire portion before applying this corrective
service.
 
WR05200 was created for users that were not yet at the corrective
service level of WR05050 or above. It is essentially the same for
users that are at a current level of WR05100, or WR05150, except for
a few additional Communication Manager fixes.
 
If you are at a maintenance level of WR05016, WR05015 (1.30.1), or
WR05000 it is recommended that you apply WR05200.
 
If your current operating is OS/2 1.30.1, or 1.30.2, and you received
a replacement "Installation" diskette from IBM to install, please
perform the following steps before applying this CSD:
 
    1.Copy your system *.BIO file from the replacement installation
      diskette to CSD diskette one (* = name of system BIO file).
 
    2.Edit the ABIOS.SYS file on CSD diskette one and place the name
      of your system *.BIO file as the first entry in the list.
 
    3.Resume normal CSD installation procedure.
 
CORRECTIVE SERVICE INFORMATION
 
The Corrective Service Facility (CSF), which is used to install the
ServicePak, is enhanced to be a Presentation Manager (PM) application.
To use CSF, insert diskette one into A: and enter "A:\SERVICE" from an
OS/2 command prompt. Then follow the PM menus. An alternative method is
to boot from diskette one. If you boot from diskette one, the ServicePak
will be installed in default directories.
 
The FIXES.TXT file can be reviewed for detailed information about what
is fixed by this ServicePak.
 
This files can be displayed with the use of a text editor, or printed
by inserting the last ServicePak diskette into Dive A:\ and entering the
following command at an OS/2 command prompt.
 
       PRINT A:FIXES.TXT
 
As a precaution retain previous IBM OS/2 corrective service diskettes,
or private fixes that have been applied to your system.
 
To make copies of this ServicePak you must use the OS/2 DISKCOPY. See
your User's Guide for instructions on how to use DISKCOPY.
 
You may also be prompted to replace certain files that have a later
date than the files on the ServicePak. It is recommended that you select
"Yes" to replace these files.
 
If problems are encountered during, or immediately after, installation
of the IBM OS/2 Corrective Service Diskette(s), please contact the IBM
Support Center through your normal support channel.
